Release Date: 06 FEB 2026
Current Version Information:
MAIN MCU V2.14
OUT MCU V1.08
KEY MCU V2.01
NET MCU V1.21
MAIN FPGA V0.40
SPHE1 AUD V1.60
Release Notes:
06 FEB 2026
MAIN MCU V2.14
OUT MCU V1.08
NET MCU V1.21
ENHANCEMENTS
- Add new command:
SET MV LAYOUTx PRIORITY A.B.C.D ：Set Multiview Layout x Priority Path A.B.C.D{x=[1~20],A.B.C.D=[1-4],Note:NUM 1 indicates the highest priority}
GET MV LAYOUTx PRIORITY ：Get Multiview Layout x Priority Path Status{x=[1~20]}
BUG FIXES
- Modify the description of the PRIORITY setting command in the H command table.
- Restore the settings of the multiview command parameters to enable the operation of hiding unused sources for the customers.
- Fix the issue of incorrect priority settings for the Multiview mode switch on the web page.
- Add the "Apply Active" button to the position of the "Multiview Layout Mode" on the webpage.
- Web modification: When selecting a certain layout in the Multiview Layout mode parameters, the image parameters will be updated simultaneously
- Fix the issue where when FORCE SDR DISABLE is set, Multiview returns to the MATRIX mode and the HDR probability is lost.
28 JUL 2025
MAIN MCU V2.11
OUT MCU V1.06
NET MCU V1.16
ENHANCEMENTS
- 1.Add CMD：
SET MV CSCx: Set Multiview ColorSpace x
{x=[0-2](0 = RGB 8b (Default),1 = Y444 8b,2 = Y422)}
GET MV CSC: Get Multiview ColorSpace Status
NOTE: This command will only take effect when the SET OUTx FORCE SDR EN/DIS command is executed in the ENABLE mode.
10 JUL 2025
MAIN MCU V2.10
NET MCU V1.15
ENHANCEMENTS
- 1.Add CMD：
SET EXAMX MODEx : Set Ex-Audio Matrix Mode{x=[0~2](0=Bind To Output,1=Bind To Input,2=Matrix}
SET OUTx AS INy : Set Ex-Audio Output x To Input y{x=[0~4](0=ALL), y=[1~8](1-4:HDMI Audio,5-8:L&R Audio)
GET EXAMX MODE : Get Ex-Audio Matrix Mode
GET OUTx AS IN : Get Output x Ex-Audio Route{x=[0~4](0=ALL)}
19 JUN 2025
MAIN MCU V2.09
OUT MCU V1.05
NET MCU V1.14
MAIN FPGA V0.40
ENHANCEMENTS
- New Timing support: 1080P 49.95Hz, 1080P 50Hz, 4K 49.95Hz, 4K 50Hz.
- Add CMD：
SET OUTx SPDIF VOLy ：Set Output x SPDIF Volume Levely{x=[0-1](0=All),y=[0(OFF),1~100(Audio Level),101(Bypass)]}
GET OUTx SPDIF VOL ：Get Output x SPDIF Volume Level{x=[0-1](0=all)}
NOTE: Due to the hardware design, if the spdif output volume is set by the command: SET OUTx SPDIF VOLy, the volume of the balanced output will also change accordingly.
- Add Input/Output CEC Settings Commands:
SET CECRX INx ON/OFF : Set CEC Received Hex Byte From Input x Source On/OFF{x=[0~4](0=ALL)}
SET CECRX OUTx ON/OFF : Set CEC Received Hex Byte From Outputx Sink On/OFF{x=[0~1](0=ALL)}
GET CECRX INx : Get CEC Received Hex Byte From Input x Source On/OFF Status{x=[0~4](0=ALL)}
GET CECRX OUTx : Get CEC Received Hex Byte From Outputx Sink On/OFF Status{x=[0-1](0=ALL)}
11 MAR 2025
MAIN MCU V2.04
OUT MCU V1.04
NET MCU V1.10
MAIN FPGA V0.33
- Added multi view layout name command :
SET MV LAYOUTx NAME LENy :zz : Set Multiview Layout x Name Length y :zz
{x=[1~20],y=[0-15](Custom Name Length),zz=Custom Name(Space Characters Are Not Supported)}
GET MV LAYOUTx NAME : Get Multiview Layout x Name{x=[0~20](0=All)}
- Improved abnormal black screen when no signal present (PIP mode)
- Fixed contour problem of HDR to SDR
06 NOV 2024:
MAIN MCU V2.01
OUT MCU V1.03
KEY MCU V2.01
NET MCU V1.07
MAIN FPGA V0.29
SPHE1 AUD V1.60
Release Notes:
- Initial Release