AC-MXNET-1G-D ~ (DECODER) V4.xx

AC-MXNET-1G-D ~ (V1 DECODER) ~ V4.32~ 03/13/2025

Notice: Please update the CBOX first before attempting an update on any endpoints. AC-MXNET-1G-D firmware V4.28/V4.25 or higher Requires CBOX firmware V2.55 or CBOX-B firmware V4.09 or later, in order for RS-232 communication to function properly.


Please visit this article to locate your device's internal model name, and determine the appropriate firmware file to load onto an AC-MXNET-1G-D endpoint: 

Release Notes:
V4.32
  1. The device's front panel text will flip positions every 10S after a period of time from when the device is powered on. This is done to mitigate screen burn-in on the LCD display after an extended period of time.

    • Related Articles

    • How To: Using the MXNET API ~ V1.26.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.26.1 Control Box Version: V4.26 and above Instructions and API attached

    • The MXNet Quick Connect Guide

      THE MXNET 1G ECOSYSTEM QUICK CONNECT GUIDE The MXNet Ecosystem is an AV-over-IP platform of products that use a traditional networking infrastructure to route video and audio signals throughout large scale systems with unlimited numbers of sources ...

    • AC-MXNET-CBOX ~ V2.73 ~ 03/14/2025

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...

    • How To: Determine the Appropriate Firmware to Use with an MXnet 1G System

      How To: Determine the Appropriate Firmware to Use with an MXnet 1G System MXnet 1G is a diverse ecosystem that is periodically evolving to provide customers with the latest features desired in the AVoIP market. Because of the diverse portfolio of ...

    • AC-MXNET-10G-TCVR Firmware ~ V1.45 ~ 3/7/2025

      NOTE: If your AC-MXNET-10G-TCVR is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...