AC-MXNET-1G-E Firmware

AC-MXNET-1G-E / AC-MXNET-1G-AVDM-E ~ (ENCODER) ~ V3.50 ~ 03/13/2025


AlertIf your current encoder firmware is on version 3.33 -> 3.37, you must first follow this article here.
NOTE: AC-MXNET-1G-E firmware V3.44 or higher requires CBOX V2.55 or CBOX-B/HA V4.09, or higher in order for RS-232 communication to function properly. 

If you cannot select your device on the CBOX using the downloaded firmware, you may have a device that is a different hardware iteration. Please see this article to determine what firmware to load onto your devices: https://support.avproedge.com/portal/en/kb/articles/how-to-determine-the-appropriate-firmware-on-an-mxnet-1g-ecosystem

Release Notes:
V3.50
  1. The device's front panel text will flip positions every 10S after a period of time from when the device is powered on. This is done to mitigate screen burn-in on the LCD display after an extended period of time.  
  2. Optimizations to HDR processing, in particular in regards to dynamic HDR metadata.
  3. Added API commands to change how MCU HDR/TMUT messages are processed, via the CBOX.
Changelog for older MCU versions are attached to this KB article for review, if desired.

    • Related Articles

    • How To: Using the MXNET API ~ V1.26.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.26.1 Control Box Version: V4.26 and above Instructions and API attached

    • The MXNet Quick Connect Guide

      THE MXNET 1G ECOSYSTEM QUICK CONNECT GUIDE The MXNet Ecosystem is an AV-over-IP platform of products that use a traditional networking infrastructure to route video and audio signals throughout large scale systems with unlimited numbers of sources ...

    • How To: USB bridge FW update for AC-MXNET-1G-E/AC-MXNET-1G-AVDM-E Versions V3.33 through V3.37.

      If a firmware update was already attempted via the CBOX, and the Encoder OLED is not turning on, or if you're experiencing issues during the update process, please call Technical Support for further assistance. What you'll need: A Windows Based PC A ...

    • AC-MXNET-10G-TCVR-AVDM Firmware ~ V1.45 ~ 3/7/2025

      NOTE: If your AC-MXNET-10G-TCVR-AVDM is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...

    • AC-MXNET-1G-AVDM-E Application Diagram

      AVPro Edge is committed to reducing our carbon footprint; Application Diagram(s) are Provided on the Attached PDF.