AC-MXNET-1G-EWP ~ (WALL PLATE) Firmware

AC-MXNET-1G-EWP ~ (V1 WALL PLATE) ~ V1.14 ~ 03/13/2025


If you cannot select your device on the CBOX using the downloaded firmware, you may have a device that is a different hardware iteration. Please see this article to determine what firmware to load onto your devices: https://support.avproedge.com/portal/en/kb/articles/how-to-determine-the-appropriate-firmware-on-an-mxnet-1g-ecosystem

Release Notes:
V1.14
  1. Optimizations to HDR processing, in particular in regards to dynamic HDR metadata.
  2. Added API commands to support the ability to modify how HDR/TMUT messages are outputted, via the CBOX.
Changelogs for previous MCU firmware iterations can be downloaded from this article for review, if desired.

    • Related Articles

    • AC-MXNET-CBOX ~ V2.73 ~ 03/14/2025

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...

    • AC-MXNET-10G-CBOX ~ V3.44 ~ 04/18/2025

      Note: Please update your CBOX before upgrading your endpoints. Download Link for Latest Version Here: https://avproglobal.egnyte.com/dl/Kp3uwWjE9c V3.44 Bug Fixes and Improvements Adjusted SDDP announcement parameters to be inline with control system ...

    • AC-MXNET-DANTE-CBOX Firmware ~ V1.05 ~ 07/08/2025

      AC-MXNET-DANTE-CBOX Firmware Release Latest Firmware Download Link: https://avproglobal.egnyte.com/dl/YfBMdcGgDGQ6 Conversion Firmware Download Link: https://avproglobal.egnyte.com/dl/mQTdpBcPXm4c Reversion Firmware Download Link: ...

    • AC-MXNET-10G-TCVR Firmware ~ V1.45 ~ 3/7/2025

      NOTE: If your AC-MXNET-10G-TCVR is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...

    • MXNet Control4: Videowall Setup Guide

      The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...