T-B+ Specification

T-B+ Specification

  • Dual RF transmission capability (433MHz and 2.4GHz with Zigbee® technology).
  • Ergonomic design for effortless, one-handed operation.
  • Tilt switch for automatic backlight activation.
  • Eight source and four general-purpose programmable keypad buttons with interchangeable key labels.
  • Includes a certificate for one Laser Shark engraved button set.
  • Supports “Companion Mode” for use with the RTiPanel app.
  • Forty assignable/programmable keypad buttons.
  • Transmits IR and RF (or both on a single button press).
  • Lithium-Ion battery and docking station included.
  • Wide IR transmitting frequency range.
  • Optional ‘Voltage’ and ‘Video’ sensing modules for equipment power status monitoring.
  • Non-volatile Flash memory for system configuration storage.
  • Field-upgradable firmware.
  • USB programming port.
  • Nominal run time: 3 hours continuous use, 7 days average use.
  • Standby time: 30 days on full charge.
  • Battery charge time: 3-4 hours.
  • High-impact molded ABS plastic enclosure.
  • Dimensions: 10.0 in x 1.9 in x 0.9 in (254 mm x 48 mm x 23 mm).
  • Weight: 7 oz. (200 g) with battery pack.
  • Warranty: Three years (parts & labor), one year on the battery.
  • Integration Designer 11 software for enhanced system management and installation efficiency.

    • Related Articles

    • IST-5 Specification

      Key Features 5” capacitive-touch screen with 854x480 resolution and ultra-thin bezel. Near-flush mount design, only 0.47”/12mm off the wall. Supports Ethernet and Wi-Fi for control communication. Power options include PoE or 12V DC. High-resolution ...

    • IST-10 Specification

      Touchpanel Features 10” capacitive-touch screen with 1920x1200 resolution and true-black display filter. Near-flush mount design at 0.47”/12mm off the wall. Built-in 10/100 Base-T Ethernet with PoE for seamless control and programming. Supports H.264 ...

    • T1-B+ Operation Guide

      Key Features: Fully customizable and programmable universal controller. Combines multiple factory remote controls into one ergonomic interface. Dual RF capability: 433MHz and 2.4GHz (Zigbee® technology). Eight source and four general-purpose ...

    • T1-B+ Firmware

      VERIFYING THAT YOU NEED THE UPGRADE If you already have version 1.14 or newer you should not upgrade your firmware to this version. Use the "Get Firmware Version" command from the Communications menu in Integration Designer to determine the current ...

    • KX4 Specification

      Display: 4” high-resolution capacitive touchscreen (480x800 pixels, 16.7M colors) with LED backlight (310 nit). Hard Buttons: Five customizable buttons, Laser Shark compatible for custom engraving. Control Processor: Built-in with support for IR, IP, ...