Can I mono the output of my Rialto 400 or 600?
Yes. With one exception. Both the Rialto 400 and 600 will NOT sum the left and right input when put into mono mode. It will derive the mono signal ONLY from the LEFT input.
On the Rialto 400 there is a switch on the bottom of the unit to switch between Mono and Stereo.
On the Rialto 600, you would flip the “Bridged” dipswitch.
Related Articles
Can I run the Rialto 400 in Bridged Mono mode?
Yes. The manual does not explicitly state that it can, but thru a couple of simple steps you can configure the amp to run a single mono speaker to achieve 400 Watts of power bridged. For a Digital Source: Switch both left and right channel Rialtos to ...
[Control4] Bijou & Rialto 600 Driver
Link to driver: Download Driver Control System: Control4 Version: v1.02 Release Date: 18 JUL 2023 Supported Products: Bijou 600 Rialto 600 Changelog: v1.02 - Initial Release
What is the difference between the Rialto 400 and Rialto 600?
The difference is in control. The Rialto 600 can be controlled via IR and RS232 control. The Rialto 400 can not. The Rialto 600 also has pre-amp volume control and 3 discrete inputs with a crossover. The Rialto 400 has signal sense, and a priority ...
[Crestron] Bijou & Rialto 600 Driver Pack
Link to driver: Download Driver Control System: Crestron Version: v2.02 Release Date: 4 SEPT 2024 Supported Products: Bijou 600 Rialto 600 Changelog: v2.02: - Fixed compatibility issue with Crestron CCD. v2.01: - Fixed toggle mute on Crestron Home ...
[Savant] Bijou and Rialto Series Profiles
Driver profiles can be directly imported from Blueprint Library Control System: Savant Supported Products: Rialto 600 ((IR, RS232, Trig Only) Bijou 600 (IR, RS232 Only) Bijou 2100 Bijou 3100 Bijou 5100D Changelog: Due to each model having their own ...