Concert AVR-7 / AVR-9 and Maestro M5 / M9 Firmware, Manual, and Control System driver downloads
Here you will find all the important downloads for the AudioControl AVR-7 and AVR-9 receivers, and the M5 and M9 processors.
In of the folders linked below, you'll find the latest firmware, user manuals, automation tables, and control system drivers for Control4, Crestron, and Elan.
Related Articles
Firmware: Update instructions for AVR 7/9 and Maestro M5/M9.
AVR-7/9 or Maestro M5/M9 Firmware update instructions: IMPORTANT NOTES Dirac files: Firmware updates clear any Dirac calibration settings that are currently uploaded to the AVR/Maestro. Make sure you have access to the saved Dirac calibration file on ...
My Maestro processor or Concert receiver is on the network, but Dirac cannot find it!
First, make sure that the CONTROL setting in the setup menu is set to IP. Even if you will ultimately use RS-232 for control, the CONTROL setting needs to be set to IP in order for Dirac to see the processor or receiver on the network. For the ...
My Maestro processor or Concert receiver is on the network, but Dirac cannot find it!
First, make sure that the CONTROL setting in the setup menu is set to IP. Even if you will ultimately use RS-232 for control, the CONTROL setting needs to be set to IP in order for Dirac to see the processor or receiver on the network. For the ...
Updating a Concert XR or Maestro X-series from firmware v1.29
If your Concert XR-4, 6, 8, or Maestro X7, 9 is on firmware version 1.29 or older, you cannot update it to the current version using the standard update method. The update process requires you to factory reset the unit, so you may want to Store a ...
Dirac Live: Setup for Maestro M5/M9 processors and AVR 7/9 receivers
Initial Setup Make sure the AVR 7/9 or M5/9 is connected to the same network as your computer. It doesn’t matter if the computer is connected via hardware or wifi, as long as it is on the same network. If your network is DHCP, the amplifier will ...