[Control4] MXNET 10G SDVoE Driver
Link to driver: Download Driver
Driver version 126 and later requires minimum AC-MXNET-10G-CBOX ~ V3.43 or 10G HA firmware ~ V5.02 & AC-MXNET-10G-TCVR ~ V1.45
Control System: Control4
Version: 134
Release Date: 2 SEPT 2025
Supported Products:
- AC-MXNET-10G-CBOX
- AC-MXNET-CBOX-HA (in 10G setting)
Changelog:
v134
Date 22-August-2025
ENHANCEMENTS
- Updated documentation for compatibility towards driver certification
v132
Date 29-July-2025
BUG FIXES
- Fix validation error report when checking Transmitter device channels
v131
Date 09-June-2025
ENHANCEMENTS
- SDDP adjustments for 10G driver compatibility
v130
Date 09-June-2025
ENHANCEMENTS
- Webview Tiler: Restricted sources are now sorted in the order they are defined
BUG FIXES
- Webview Tiler: Fixed crash which could occur when routing Digital Media to an input on the MV41
EXCEPTIONS
- When a tiled videowall is active, you cannot select the last single source that was shown. To resolve, please select a different source, before the one you intend to watch. We are investigating a solution to this issue.
v129
Date 11-April-2025
ENHANCEMENTS
- Webview Tiler: Added the option to display static images for sources, rather than previews
- Webview Tiler: Refreshing Navigators now has a delay before the driver updates its configuration
- Webview Tiler: Restricted sources are now sorted in the order they are defined
- Webview Tiler: Removed "No Source" text when an image is found, but can't be loaded
v127
Date 12-March-2025
BUG FIXES
- Webview Tiler: Fixed issue where the room's display may not be switched on when the webview tiler is set
EXCEPTIONS
- When a tiled videowall is active, you cannot select the last single source that was shown. To resolve, please select
a different source, before the one you intend to watch. We are investigating a solution to this issue.
v125
Date 24-Feb-2025
ENHANCEMENTS
- Webview Tiler: Added the option to fix layout selection
- Webview Tiler: Added the option to restrict the available sources
- Webview Tiler: Operational mode reflects misconfigurations in op mode
- Webview Tiler: Added driver icon in Composer for the webview proxy
BUG FIXES
- Webview Tiler is now compatible with the SDDP-enabled variant of the MXNet 10G driver
EXCEPTIONS
- When a tiled videowall is active, you cannot select the last single source that was shown. To resolve, please select
a different source, before the one you intend to watch. We are investigating a solution to this issue.
v124
Date 14-Feb-2025
ENHANCEMENTS
- Add Generic Driver Model to be a added through SDDP
- Updated Documentation
EXCEPTIONS
- When a tiled videowall is active, you cannot select the last single source that was shown. To resolve, please select
a different source, before the one you intend to watch. We are investigating a solution to this issue.
v123
Date 13-Jan-2025
ENHANCEMENTS
- Webview TIler: Added new switching option: "Audio to MXNet, Video to Room"
EXCEPTIONS
- When a tiled videowall is active, you cannot select the last single source that was shown. To resolve, please select
a different source, before the one you intend to watch. We are investigating a solution to this issue.
v122
Date 19-Dec-2024
ENHANCEMENTS
- Webview Tiler: When the webview is opened, the last selected layout is activated - even if it was a single source
- Webview Tiler: Added configuration option to control how audio and video are switched
- Webview Tiler: Split "Resolution" property into "Tiler Resolution" and "Single-Source Resolution"
BUG FIXES
- MXNet: Single-screen layouts now use the full video source resolution
EXCEPTIONS
- When a tiled videowall is active, you cannot select the last single source that was shown. To resolve, please select
a different source, before the one you intend to watch. We are investigating a solution to this issue.
v119
Date 04-Dec-2024
ENHANCEMENTS
- Added the option of halving the output framerate
EXCEPTIONS
- When a tiled videowall is active, you cannot select the last single source that was shown. To resolve, please select
a different source, before the one you intend to watch. We are investigating a solution to this issue.
v118
Date 21-Nov-2024
ENHANCEMENTS
- Webview Tiler: Allow audio selection for single source layouts in all cases
- Webview Tiler: When the webview is opened, the last selected layout is activated
BUG FIXES
- MXNet: Fixed issue where selecting a multiview layout with no inputs would fail
- Added workaround to prevent a crash on first startup for Core3 processors
EXCEPTIONS
- When a tiled videowall is active, you cannot select the last single source that was shown. To resolve, please select
a different source, before the one you intend to watch. We are investigating a solution to this issue.
v116
Date 13-Aug-2024
ENHANCEMENTS
- Added property to allowing DISCONNECT_OUTPUT to be ignored which no longer has the need for PathSetter modules which is shown in the "Link to Audio Routing Guide"
- Added a property change to allow audio selection in WebView Tiler to be changed from MXnet to Room Binding
BUG FIXES
- Fixed audio routing issues when using the WebView Tiler
v113
Date 09-May-2024
ENHANCEMENTS
- MASSIVE improvement and update to the multiview/tiler driver, introducing the "webview" version similar to our MV-41 driver!
- Read the "documentation" tab of the "10G tiler webview" driver to learn how to use
- Older "Tile" and "Tiler" drivers are included for legacy systems still using the old tiler drivers but are no longer supported
BUG FIXES
-Audio routing fixes when using in combination with videowalls or multi-display manager
-We have produced a manual to complicated audio routing solutions. Please be sure to follow it when utilizing extracted audio into a separate audio matrix driver: Download Guide
v108
ENHANCEMENTS
- Performance enhancements for the Multiview/tiler driver
BUG FIXES
- Fixed issues from Director OS 3.4.0 audio routing
v107
Date 28-November-2023
BUG FIXES
- Fixed interpretation of video resolution data for MXnet system
- Avoid user-selected tiler output resolution from being overwritten
- Fixed Video path disable and audio path disable when turning off a room
v105
Date 14-February-2023
ENHANCEMENTS
- Added support for tiling on 10G receivers
v104
Date 23-December-2022
ENHANCEMENTS
- Initial Release
- Bidirectional serial connections
- Combined audio/video switch
- Mosaic Video Wall command
- 10G release
- Update video wall to use vwid commands
BUG FIXES
- Fix to allow case-insensitive MAC addresses in devicelist
Related Articles
[ELAN] MXNET 10G SDVOE Driver
Link to driver: Download Driver Control System: ELAN Version: 1.0.7 Release Date: 26 NOV 2024 Supported Products: AC-MXNET (CBOX) 10G Changelog: v1.0.7: -Enhancements - Volume support -Bug Fix - RS232 command reboots TX/RX fix v1.0.6: - 10G release - ...[Extron] MXNET 1G / 10G Driver Suite
Link to module: Download Module Suite Control System: Extron Developer: Control Concepts Inc. Version: 1_0_0 Release Date: 19 NOV 2024 Supported Products: AC-MXNET-CBOX (1G) AC-MXNET-10G-CBOX (10G) Changelog: v1_0_0 - Initial ReleaseAC-MXNET-10G-CBOX ~ V3.44 ~ 04/18/2025
Note: Please update your CBOX before upgrading your endpoints. Download Link for Latest Version Here: https://avproglobal.egnyte.com/dl/Kp3uwWjE9c V3.44 Bug Fixes and Improvements Adjusted SDDP announcement parameters to be inline with control system ...[AMX] MXnet Control Driver
Link to driver: AMX Developer Site [External] Control System: AMX Version: [See external site] Release Date: [See external site] Supported Products: AC-MXNET (CBOX) 1G Changelog: - Initial releaseMXNet Control4: Videowall Setup Guide
The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...