[Control4] MXNET Dante Router

• Related Articles

• How to: Setup and Configure an MXnet Network Switch for AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 Devices.

  Overview This will be a configuration guide for configuring an MXnet network switch to work in tandem with the AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 devices. The new AC-MXNET-1G-DANTE-EV2/DV2 products use tagged traffic to allow for MXnet ...

• How-to: Configuring MXNet Network Switches to Enable Dante™ and MXNet AVoIP Traffic on the Same VLAN

  This article is a comprehensive set of instructions for configuring the following MXNet network switches in order to run Dante audio traffic on the same VLAN as the MXNet encoders and decoders: AC-MXNET-SW10 AC-MXNET-SW12 AC-MXNET-SW24 AC-MXNET-SW48 ...

• An Introduction Guide to the AC-MXNET-DANTE-CBOX

  An Introduction Guide to the AC-MXNET-DANTE-CBOX This article goes over the majority of features that are currently available for the AC-MXNET-DANTE-CBOX, such as configuring and monitoring devices, performing route subscriptions, and more. Note: the ...

• AC-MXNET-DANTE-CBOX API ~ V1.00 ~ 06/27/25

  AC-MXNET-DANTE-CBOX API Published Version: V1.00 Date Published: 6/27/2025 Download Link: https://avproglobal.egnyte.com/dl/wgfnjhLP7P Requirements Dante CBOX RJ-45 cabling Personal Computer Terminal Client capable of establishing telnet/TCP sockets ...

• [URC] MXNET Dante Router

  Link to driver: Download Driver Control System: URC Version: 1.0.0.3 Release Date: 25 JUN 2025 Supported Products: AC-MXNET-CBOX-HA (with CBOX Dante v1.03 firmware loaded) Changelog: v1.0.0.3: Initial Release