- Driver provides switching capabilities and limited RS232 Passthrough and built in CEC commands.
- Driver limited to 15 x 15 using the "MxNet" driver.
- (Expandable using the "32x32, 64x64, and 100x100" modules which will only allow the add-on of
Changelog:
v2.2.1.15
- Added audio controls to extension driver.
v2.1.0.57
- Added MV41V2 support
v1.8.3:
- Fix for extension drivers not loading correctly
- Added events for turning displays on
- Added actions for switching sources
- Added actions for switching layout
- No longer required to add an A/V switch driver when adding platform driver
- Added ability to turn source off
BUGFIX:
- Fix for creation of multiple comms connections to MXnet
v1.8.1:
- Added output volume control
- Update to SDK 17.0.22
- Improve stability in AC-MXNET-CBOX communications
v1.7.1:
- Added RS232 passthrough. Ensure processor is running version 3.16.109 or higher
BUGFIX:
- No longer loses connection on large systems
v1.6.6:
- Added Immediate switch feedback
BUGFIX:
- Fix for crash if no video walls present.
v1.6.4:
- Added Signal in Video wall module for Mosaic
- Combined switching to use single command aset :av
- Remove automatic sending of stream on/off commands with switching
- Added signal to control sending of stream on/off commands with switching
- Added missing instructions regarding proper setup of driver to included documentation
BUGFIX:
- Fix problem with sending RS232 passthrough commands to devices that didn't have a
friendly name
v1.5.5:
- Added Crestron Home Drivers for 32 ,64 and 100 matrix switcher sizes
- CEC fix for extra space in command
- Added CEC Control for inputs and outputs
- Changed how video wall layout recall works. Set layout name via the LAYOUT signal and recall via RECALL_LAYOUT
- Setting switching input to 0 stops video stream