Dirac Live: Bass Control for X / XR series processors and receivers

• Related Articles

• Dirac Live: Bass Control for X / XR series processors and receivers

  The AudioControl Maestro X9 / X7 processors and Concert XR8 / XR6 / XR4 receivers are enabled with the Dirac Live Bass Control features. Please make sure your processor or receiver is running the latest firmware in order to have access to the Bass ...

• Dirac Live: Setup for X / XR series processors and receivers

  This tutorial was written with Dirac version 3.4.4. Later versions of Dirac might have slight variations to the process. If you see something that doesn’t match with what you read in this guide, please call AudioControl tech support. The process for ...

• IP & RS232 Control Settings: X / XR series processors and receivers

  Your AudioControl processor or receiver is able to be controlled with home automation systems such as Control4, Crestron, Savant, RTI, etc. Control can either be via IP, RS232, or IR. For control via IP or RS232 please adjust the following settings ...

• Input Configuration settings: X / XR series processors and receivers

  The Input Configuration settings in the X series processors and XR series receivers allow you to optimize audio settings for each input depending on the type of source device you have connected to an input. To access the setup menu go to the front ...

• MANUALS: X / XR series processors & receivers

  Manuals for the new X series home theater processors and XR series receivers are available on the individual product pages on our website, with direct links provided below. Firmware update files are available here. XR 8 XR 6 XR 4 X 9 X 7 Discontinued ...