Controlling MXNet with Control4

How To: Controlling MXNet with Control4

MXNet is designed to work with control systems such as Control4. Take a look at what you can do with Control4 to connect and control the MXNet Ecosystem. 



For detailed Control4 driver configuration steps please see our Off-Site Pre-Commission and On-Site Installation driver setup guides. 

    • Related Articles

    • [ELAN] MXNET 10G SDVOE Driver

      Link to driver: Download Driver Control System: ELAN Version: 1.0.7 Release Date: 26 NOV 2024 Supported Products: AC-MXNET (CBOX) 10G Changelog: v1.0.7: -Enhancements - Volume support -Bug Fix - RS232 command reboots TX/RX fix v1.0.6: - 10G release - ...

    • MXNet: AV over IP Complete System Set-Up! (With TIMER!)

      John Tumbleson (The Mind Behind MXNet Mentor) and Tom Devine (Noob) put together an entire AV over IP system using MXNet Encoders, Decoders and an MXNet Network Switch racing against the clock to complete the system as fast as they can!  The goal of ...

    • [Extron] MXNET 1G / 10G Driver Suite

      Link to module: Download Module Suite Control System: Extron Developer: Control Concepts Inc. Version: 1_0_0 Release Date: 19 NOV 2024 Supported Products: AC-MXNET-CBOX (1G) AC-MXNET-10G-CBOX (10G) Changelog: v1_0_0 - Initial Release

    • AC-MXNET-SW48 Application Diagram

      AVPro Edge is committed to reducing our carbon footprint; Application Diagram(s) are Provided on the Attached PDF.

    • MXNet Control4: Incorrect Encoder/Decoder Assignment Correction

      If one or more encoder(s) or decoder(s) were installed in the incorrect locations, and the video switching events are switching the incorrect output, the encoder(s)/decoder(s) need to be swapped in the Control4 driver. This guide will show you the ...