ISR-AB Specification

ISR-AB Specification

Product Introduction

  • ISR-AB is an advanced charging base for Intelligent Surface remotes. ​
  • Features three programmable buttons and a "Find My Remote" button. ​
  • Provides dedicated Wi-Fi access for seamless control.

Key Features

  • Instant-Connect Wi-Fi Access Point for ISR-4 and ISR-2 remotes. ​
  • Three programmable soft-touch buttons for easy control of custom scenes. ​
  • "Find My Remote" button triggers an audible beep to locate misplaced remotes. ​
  • Stylish design with an adjustable light ring indicating charging status.

Specifications

  • Power Supply: +5VDC 2.0A.
  • Ethernet: 10/100/1000BaseT RJ-45 Connector.
  • Wi-Fi Frequency: 2.4GHz with a range of 100ft (30m) indoors. ​
  • Battery charge time: 3-4 hours. ​
  • Minimum Integration Designer Version: 11.12 or later.

    • Related Articles

    • ISR-4 Specification

      Key Features 4” high-brightness touchscreen offers a mobile-like experience with a crystal-clear interface. Aluminum and glass design combines art and engineering for a modern look. Backlit soft-touch buttons and a 5-way thumbpad provide smooth ...

    • ISR-2 Specification

      Key Features 2.8” high-brightness touchscreen display for vivid media control. Stylish aluminum and glass design enhances aesthetics. Backlit soft-touch buttons and full numeric keypad for easy navigation. Instant-on Wi-Fi technology ensures fast ...

    • ISR-AB Operation Guide

      Key Features: Wi-Fi access point for instant-on connection for ISR-4 or ISR-2. Wired or wireless connection to the system. Three programmable soft-touch buttons for scenes and commands. “Find My Remote” button. Modern design with LED light ring ...

    • ISR-4 Operation Guide

      Key Features: 4” high-resolution capacitive LCD touchscreen (480x800). Thin, sleek design with superb ergonomics. Wi-Fi control with integrated 802.11b/g/n wireless Ethernet. Accelerometer for “instant-on” control. Twenty assignable/programmable ...

    • ISR-2/ISR-4 Firmware

      FIRMWARE UPGRADE PROCEDURE Over Ethernet - Ensure ISR-2/4 is connected to the same network as the PC using Integration Designer. - Choose the "Update Firmware" command from the "Communications" menu in Integration Designer. - Follow the instructions ...