IST-5 Operation Guide

IST-5 Operation Guide

Here are the key bullet points extracted from the document:

Key Features:

  • Hi-resolution 5” capacitive-touch screen (854x480) with ultra-thin bezel. ​
  • Near-flush mount (0.47”/12mm off the wall). ​
  • Ethernet and Wi-Fi options for control and communication.
  • PoE or 12V DC power options. ​
  • Exceptional video streaming and two-way intercom (H.264 or H.265 format). ​
  • Dual speakers and far-field microphone array (with mute button). ​
  • Proximity and ambient light sensors. ​
  • Portrait or landscape mounting. ​

Product Contents:

  • IST-5 unit. ​
  • Metal Wall Mounting Bracket (1). ​
  • Mounting Bracket Screws (2).
  • Single Gang Low Voltage Mounting Bracket (1). ​

Mounting Bracket Installation:

  • Minimum mounting depth: 1.34” (34mm). ​
  • Recommended mounting height: 57”-65” (145 cm -165 cm) from the floor. ​
  • Portrait or landscape orientation supported. ​
  • Use included mounting bracket and screws. ​

Power Options:

  • Powered via Ethernet (PoE) or 12VDC power supply (not included). ​
  • PoE requires IEEE 802.3at standard. ​
  • 12VDC power supply: 12VDC/2A. ​

Hard Buttons:

  • Power Button: Short press turns display on/off. ​
  • Mute Button: Short press disables/enables microphone. ​
  • Full Reboot: Press power + mute button simultaneously. ​
  • Network IP/Wi-Fi reset: Hold power + mute button for 4 seconds. ​
  • Factory Reset: Hold power + mute button for 8 seconds. ​

Settings Categories:

  • Screen Settings: Proximity sensor, ambient light sensor, timeout, rotation. ​
  • Sounds Settings: Volume control, microphone mute. ​
  • Network Settings: Wi-Fi setup (scan or manual entry). ​
  • Passcode Setting: Restrict access to settings with a 4-digit code. ​
  • About Settings: Device information (name, model, IP/MAC address, firmware version). ​

Safety Suggestions:

  • Keep away from heat sources and water. ​
  • Use only manufacturer-specified accessories. ​
  • Unplug during lightning storms or long periods of non-use. ​
  • Route power cords to avoid damage. ​

Cleaning:

  • Use a lightly dampened lint-free cloth with water or mild detergent. ​
  • Avoid harsh chemicals. ​

Warranty:

  • 3-year warranty for new products (1-year for rechargeable batteries). ​
  • Excludes damages from misuse, accidents, or unauthorized repairs. ​

Contact Information:

    • Related Articles

    • IST-10 Operation Guide

      Product Models: IST-10-B (Black), IST-10-W (White) Key Features: 10” hi-resolution capacitive-touch screen (1920x1200) Ultra-thin bezel, near-flush mount (0.47”/12mm off the wall) Ethernet and Wi-Fi options PoE or 12V DC power options Video streaming ...

    • IST-5 Specification

      Key Features 5” capacitive-touch screen with 854x480 resolution and ultra-thin bezel. Near-flush mount design, only 0.47”/12mm off the wall. Supports Ethernet and Wi-Fi for control communication. Power options include PoE or 12V DC. High-resolution ...

    • IST-10 Specification

      Touchpanel Features 10” capacitive-touch screen with 1920x1200 resolution and true-black display filter. Near-flush mount design at 0.47”/12mm off the wall. Built-in 10/100 Base-T Ethernet with PoE for seamless control and programming. Supports H.264 ...

    • RCM-4 Operation Guide

      FCC Compliance Complies with Class B digital device limits under Part 15 of FCC Rules. Operation subject to two conditions: no harmful interference and acceptance of interference. Safety Suggestions Keep away from heat sources, water, and moisture. ...

    • ESC-2+ Operation Guide

      Key Features of ESC-2+ Ethernet to Serial Converter: Adds two RS-232 ports with full two-way control capability to RTI XP series control processors. Supports multiple ESC-2+ modules for extensive control of serial devices. Enables two-way serial ...