MXNet: AV over IP Complete System Set-Up! (With TIMER!)
MXNet: AV over IP Complete System Set-Up! (With TIMER!)
John Tumbleson (The Mind Behind MXNet Mentor) and Tom Devine (Noob) put together an entire AV over IP system using MXNet Encoders, Decoders and an MXNet Network Switch racing against the clock to complete the system as fast as they can!
The goal of this video is to show integrators how easy it can be setting up a system with MXNet AV over IP Ecosystem.
-2 piece projection - A 2 piece projection system consists of a light engine shining light onto a screen. The light engine can be placed in front of (front projection) or behind (rear projection) the screen -2/3 pulldown – a method of video ...
The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...
NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...
A video wall doesn’t have to be the challenge most installers see it as today. In this article we have put together a step-by-step guide to use when building a video wall. In a culture of smart phones and short attention spans, a dynamic video wall ...