MXnet Firmware New Location

• Related Articles

• AC-AEX-DEARC-R Firmware Update version v1.25

  Newest firmware for the AC-AEX-DEARC-R: Main MCU Ver 1.15 FPGA Ver 0.11 SPHE Ver 1.60 Bypassing all CEC commands is supported on PCB05 and later Fixed ARC Initialization Requirements: - Windows PC - USB-A to USB-C data cable for direct serial ...

• AC-AEX-DEARC-T Firmware Update version v1.15

  Newest firmware for the AC-AEX-DEARC-T: Main MCU Ver 1.15 FPGA Ver 0.11 Bypassing all CEC commands is supported on PCB05 and later Fixed ARC Initialization Requirements: - Windows PC - USB-A to USB-C data cable for direct serial connection - Firmware ...

• AC-DA-14X Firmware Release

  Newest firmware for the AC-DA-14X: Main MCU Ver 1.00.00 Aux MCU Ver 1.00.00 - Resolved Video Output issue with select TMDS Sources Requirements: - Windows PC - USB-A to USB-C data cable for direct serial connection - Firmware FWM file and Uploader ...

• MXNet Control4: Videowall Setup Guide

  The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...

• MXNet Control4: Incorrect Encoder/Decoder Assignment Correction

  If one or more encoder(s) or decoder(s) were installed in the incorrect locations, and the video switching events are switching the incorrect output, the encoder(s)/decoder(s) need to be swapped in the Control4 driver. This guide will show you the ...