RP-4 Specification

RP-4 Specification

  • The RP-4 is a cost-effective control solution for single-room installations like home theaters, media centers, and bedrooms.
  • It features an integrated 433-MHz RF receiver, IR control, voltage sense inputs, and relays in a compact design.
  • Supports one-way control via the RTiPanel app for Apple iOS devices (not Android or Virtual Panel).
  • Stores all system commands and macros for reliable control.
  • Includes four infrared ports with routing and output strength adjustment.
  • Compatible with industry-standard IR emitters and IR expansion devices.
  • Two voltage sensing inputs monitor equipment power status.
  • Two programmable relays provide contact closure for devices like TV lifts, shades, and projection screens.
  • Works with all RTI 433MHz wireless remotes.
  • Features RF signal reception and Ethernet activity LEDs.
  • Can be programmed via USB or Ethernet using Integration Designer® software.
  • Includes mounting options for wall or free-standing installation.
  • Non-volatile Flash memory retains system configuration even without power.
  • Comes with a power supply, antenna, mounting plate, screws, and drywall anchors.
  • Does not support RTI wired interfaces, Ethernet expansion modules, additional RF antennas, Zigbee transceivers, two-way drivers, or event programming.
  • Integration Designer 11 software enhances installation efficiency with advanced features like custom sliders and system tracking.

    • Related Articles

    • RP-4 Firmware

      VERIFYING THAT YOU NEED THE UPGRADE If you already have version 1.03 or newer you should not upgrade your firmware to this version. Use the "Get Firmware Version" command from the Communications menu in Integration Designer to determine the current ...

    • RP-4 Operation Guide

      Key Features of RP-4 Control Processor: Stores all system commands and macros for reliable control. Integrated 433MHz RF receiver. Four infrared ports with routing and output adjustment. Supports RTiPanel App for one-way control via Apple iOS ...

    • CX7 Specification

      CX7 Touchpanel Features: 7” WVGA LCD with 800x480 resolution and capacitive touchscreen. Adjustable tilt display (10°-90°) or inverted under-cabinet mounting. Built-in camera, microphone, and stereo speakers for intercom capability. Composite, ...

    • KX4 Specification

      Display: 4” high-resolution capacitive touchscreen (480x800 pixels, 16.7M colors) with LED backlight (310 nit). Hard Buttons: Five customizable buttons, Laser Shark compatible for custom engraving. Control Processor: Built-in with support for IR, IP, ...

    • U3 Specification

      Durable, weather-resistant design (IP66 rated: dust tight and water repellent). Ergonomic design for effortless, one-handed operation. Completely sealed and floats in water. Dual RF capability: 433MHz and 2.4GHz (Zigbee® technology). Sixteen ...