The document provides detailed instructions for integrating RTI controllers with 2N Doorbell Stations using SIP protocol for bi-directional audio and video communication. Key points include:
- Supported RTI Controllers: IST-5, IST-10, KA8, KA11, KX4, KX3, CX7, CX10.
Configuration:
- RTI controllers are configured via the VoIP tab in Integration Designer (ID11).
- Enable VoIP support, set incoming call pages, and adjust video/audio settings.
2N Door Unit Setup:
- Access via IP address, update firmware, and configure users and dialing settings.
Calling:
- From 2N to RTI: Assign static IP to RTI, configure users in 2N, and set quick dial buttons.
- From RTI to 2N: Use VoIP commands in ID11 and configure 2N to accept calls automatically.
Video Integration:
- RTI controllers can receive video from 2N using H.264 codec.
- RTSP video streams can be displayed on RTI controllers for monitoring purposes.
SIP Server Registration:
- Allows RTI devices to register with a SIP server for username-based calling.
DTMF for Door Release:
- Configure DTMF commands in RTI and activation codes in 2N for door mechanisms.
Audio Settings:
- Echo and silence suppression, half duplex, and push-to-talk options are available for better audio quality.
Outgoing Video Settings:
- Adjust resolution and frame rate to optimize performance.
The document provides step-by-step instructions for setup and configuration on both RTI and 2N devices, ensuring seamless integration for audio, video, and control functionalities.