Overview This will be a configuration guide for configuring an MXnet network switch to work in tandem with the AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 devices. The new AC-MXNET-1G-DANTE-EV2/DV2 products use tagged traffic to allow for MXnet ...
This article is a comprehensive set of instructions for configuring the following MXNet network switches in order to run Dante audio traffic on the same VLAN as the MXNet encoders and decoders: AC-MXNET-SW10 AC-MXNET-SW12 AC-MXNET-SW24 AC-MXNET-SW48 ...
An Introduction Guide to the AC-MXNET-DANTE-CBOX This article goes over the majority of features that are currently available for the AC-MXNET-DANTE-CBOX, such as configuring and monitoring devices, performing route subscriptions, and more. Note: the ...
NOTICE: Please update the CBOX first before attempting an update on any endpoints. If you cannot select your device on the CBOX using the downloaded firmware, you may have a device that is a different hardware iteration. Please see this article to ...