What is Dirac Live®?

What is Dirac Live®?

Dirac Live® is a mixed-phase room correction technology used in cinemas, studios and luxury cars. It corrects not only the frequency response but also the impulse response, a factor critical for accurate staging, clarity and bass reproduction. Dirac Live® will:

  1. Improve the imaging of your sound system and the clarity of the music
  2. Make voices more intelligible
  3. Produce a tighter bass
  4. Reduce listening fatigue
  5. Improve the timbre, remove resonances and room modes
  6. Reduce early reflections
  7. Mixed-phase filtering for maximum performance and time domain control
  8. High-resolution filters through a proprietary filter structure with low computational requirements.

How it works

It takes approximately 15 to 30 minutes to calibrate your room (depending on how many channels) with the Dirac Live Calibration Tool™.

Test signals are sent out from the Dirac Live Calibration Tool™ through your audio system and loudspeakers. These signals allow the software to check the sound’s behavior across the entire audio spectrum.

Measurements are taken in 9 different positions to provide the best results over the entire listening area.
The speakers and room are assessed in terms of the frequency response and the impulse response, both vital aspects of sound reproduction. Dirac’s auto-target function will automatically suggest an appropriate target response.

More information about the Dirac Live technology can be found at their website.

Dirac Live for AudioControl can be downloaded on The AVR-7, AVR-9 and Maestro M9 product pages.

Keep in mind it will only work if you have one of said products mentioned above.

    • Related Articles

    • Dirac Live - Filter Exporting issues

      After getting through the whole Dirac process, the installer may encounter a network error, or find that the filter just isn’t in the X-series. Here’s how we can help: 1. Try again! a. Before exiting Dirac, the installer should have saved a copy of ...
    • Bass Control in Dirac Live

      Original PDF Version is attached to this article. This document covers Dirac Bass Control inside the Dirac Live application and is divided into two parts: Section 1: User Guide The first section is a user guide that goes through the work process of ...
    • Dirac Live: Volume Calibration makes a Ticking Noise

      In the Volume Calibration stage of Dirac, each channel should output a pink noise test tone, and the sub will output a short tone sweep. In some cases, you will hear the channels output a mysterious ticking noise. Trying to proceed through the ...
    • Dirac Live: Bass Control for X / XR series processors and receivers

      The AudioControl Maestro X9 / X7 processors and Concert XR8 / XR6 / XR4 receivers are enabled with the Dirac Live Bass Control features. Please make sure your processor or receiver is running the latest firmware in order to have access to the Bass ...
    • Dirac Live: Bass Control for X / XR series processors and receivers

      The AudioControl Maestro X9 / X7 processors and Concert XR8 / XR6 / XR4 receivers are enabled with the Dirac Live Bass Control features. Please make sure your processor or receiver is running the latest firmware in order to have access to the Bass ...