Dante
Mixing AudioControl Dante amps and other Dante streams together.
An AudioControl Dante amplifier has 3 kinds of inputs: Local inputs Dante Inputs (streams) AudioControl Dante Streams Local Inputs Local Inputs are the RCAs and Digital inputs that are connected directly to the amplifier. In the Input Selection menu ...
Renaming Dante Inputs on your AudioControl Dante Amplifier
Dante Input Names On AudioControl's Dante-enabled amplifiers, like the M4800D, M6800D, and the CM 70V Dante amps, the inputs shared between amplifiers will automatically display their chosen name when you click Look for Devices. For example, on your ...
Using Dante with AudioControl
An Introduction to Dante Dante is an exciting tool that allows AV installers to effortlessly transmit audio sources to multiple devices without any noticeable latency. In a typical matrix amp like our M6800, you have full 16x16 control, easily ...
Dante Best Practices Part 1: First Steps
This is Part 1 in a series of articles about AudioControl Dante amps. If it's your first time setting up these amps, we highly recommend you read through this first part! To learn about connecting your AudioControl amps using Dante, check out Part 2: ...
Dante Best Practices Part 2: Setting up Dante
This is Part 2 in a series of articles about AudioControl Dante amps. If it's your first time setting up these amps, we highly recommend you read through Part 1: First Steps. To learn more about using the Dante Controller with our amplifiers, check ...
Dante Best Practices Part 3: Using Dante Controller
This is Part 3 in a series of articles about AudioControl Dante amps. If it's your first time setting up these amps, we highly recommend you read through Part 1: First Steps. To learn about connecting your AudioControl amps using Dante, check out ...
Using the Control4 driver with your AudioControl Dante Amp
The Control4 driver for AudioControl’s Dante-enabled amplifiers makes setting up a large-scale Dante audio system easy in just a few steps. The process is the same whether you are using the M4800D, M6800D, or CM-70v Dante amplifiers. The Control4 ...
Does Signal Sense work with Dante Inputs?
Yes! If signal sense is On on your Dante amplifier and the zones are set to a Dante input, as soon as signal is sensed on that input the connected zones will turn on and output audio. Signal sensing does not actively switch inputs, so if a zone is ...