AC-MXNET-CBOX-B/HA Firmware Updates

AC-MXNET-CBOX-HA ~ V4.32 ~ 07/28/2025

NOTE: If your CBOX is reading firmware with a version number of V2.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-firmware

Please update the CBOX first, before attempting updates on the endpoints. Using CBOX-B/HA Firmware V4.05 or above requires the following in order for RS-232 communication to function properly:
AC-MXNET-1G-D Decoders must be updated to V4.25/V4.28 or later.
AC-MXNET-1G-E Encoders must be updated to V3.44 or later.
AC-MXNET-1G-EWP Wall Plate Encoders must be updated to V1.10 or later.
AC-MXNET-1G-DANTE-E Encoders must be updated to V1.16 or later.
AC-MXNET-1G-EV2/EV2-B/EV2-C Encoders must be updated to V1.10/V2.04/V3.00 or later.
AC-MXNET-1G-DV2/DV2-B/DV2-C Decoders must be updated to V1.06/V2.02/V3.00 or later.
Download Link For Latest Firmware Here: AC-MXNET-CBOX-HA Firmware + Changelogs

If the physical HA Port of the CBOX-HA is desired to be utilized, please download the "IP-1G-CTL-004_Ver0.08.fwm" file from the below link, and upload the file in the same manner as uploading typical CBOX firmware.

    • Related Articles

    • MXnet 1G API ~ V1.26.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.26.1 Control Box Version: 2.71 && V4.21 and above Instructions and API attached

    • The MXNet Quick Connect Guide

      THE MXNET 1G ECOSYSTEM QUICK CONNECT GUIDE The MXNet Ecosystem is an AV-over-IP platform of products that use a traditional networking infrastructure to route video and audio signals throughout large scale systems with unlimited numbers of sources ...

    • AC-MXNET-10G-CBOX-HA ~ V5.04 ~ 7/28/2025

      Note: Please update your CBOX before upgrading your endpoints. If your 10G CBOX is reporting firmware within the V3.XX range, please visit this article here to download the proper firmware. Download Link for Latest Firmware Here: AC-MXNET-10G-CBOX-HA ...

    • AC-MXNET-CBOX ~ V2.73 ~ 03/14/2025

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...

    • How To: Convert an AC-MXNET-CBOX-HA to a 4-In-1 Software Package.

      How To: Convert an AC-MXNET-CBOX-HA to a 4-In-1 Software Package This article walks through the necessary procedures and requirements to convert a CBOX-HA to utilize a 4-in-1 Software package, which contains firmware for 1G, 10G, USP, and Dante ...