Firmware update for all Bijou Models 2100/3100/5100D
Bug Fixes:
Resolves the issue where the unit will drop off the network after a certain amount of time.
Improves ARC/eARC compatibility. Especially on older TV models with just ARC
Improves fan speed response, so it will not turn on to 100% as soon as it gets warm. Allows for quieter fan performance.
Resolves Mute command feedback issue for control systems
Resolves issue where unit would not turn on via Signal sense on the digital input
New Features:
Parametric EQ – Graphic EQ section now has a toggle switch to change the Graphic to a Parametric EQ. Allows user to adjust any EQ point with Q/Bandwidth control
CDS Limit (Input Settings) – For eARC signals, Bijou can now tell the TV to only send 5.1 or only 2.0 signals to the bijou.
Front panel button turn off feature – Press and hold the front panel button, after 2 seconds it will instruct user to let go to turn off. If user keeps holding button, after 10 seconds it will instruct user to let go for factory reset
3100 Only – Center/Sub channel option – Allows user to change the center channel output to a Sub channel
Power Off Timer (System Settings) – Control that allows the Bijou to turn off after a determined amount of time after receiving no signal from the active input. Only applicable on the analog, digital or Dante inputs. If left on the eArc input, and TV is on, the bijou will not turn off via this control.