Saving and Loading Settings Files for the Bijou

Saving and Loading Settings Files for the Bijou

The Bijou2100, 3100, and 5100D have many settings that can be adjusted to perfect your system, and it's recommended to save a backup of these settings in case there's a firmware update, a factory reset is needed, or you want to re-use these settings on other devices. 

Save Settings


To save the settings, open the Bijou's web interface, navigate to the System settings page, and scroll down to the bottom section. On the Save Settings option, click Export settings.

A window will pop up letting you name the file before saving it. Click download, and a .json file will be downloaded to the designated download folder on your computer.

Idea
Move the config file to a folder related to the project you are working on so it will be easier to find if and when it's needed.

Load Settings


To load a settings file, open the Bijou's web interface, navigate to the System settings page, and scroll down to the bottom section. On the Load Settings option, click Browse.
In the window that appears, navigate to the previously saved .json file and click Open.
Once you've selected the desired file, click Import Settings, and the Bijou will begin loading the settings. The import process takes about a minute.

When settings are finished loading, the Bijou will reboot and the page will refresh.

Info
Files can only be loaded into a Bijou if they were saved from a the same model of Bijou. For example, a Bijou2100 can only load a file that was saved from a Bijou2100.

    • Related Articles

    • Updating Firmware on the Bijou 2100, 3100, and 5100D

      The Bijou2100, Bijou3100, and Bijou5100D have 2 different kinds of firmware updates, an MCU and a DSP update. Firmware can be found from the product's page on www.audiocontrolpro.com, under the "Resources" tab. Bijou5100D Firmware: ...

    • Firmware update for all Bijou models 11/19/25

      Firmware update for all Bijou Models 2100/3100/5100D 2100 - MCU 51, DSP 21 3100 - MCU 51, DSP 21 5100D - MCU 51, DSP 29 Bug Fixes: Resolves the issue where the unit will drop off the network after a certain amount of time. Improves ARC/eARC ...

    • CEC controls on the Bijou

      The Bijou 2100, 3100, and 5100D will always respond to CEC commands if connected to an ARC/eARC device via an HDMI cable and set to the eARC input. If the Bijou is in standby, it will turn on when the TV is powered on, and set itself to the eARC ...

    • Savoy G3 amplifier input sensitivity switch settings.

      The Savoy G3 theater amplifier provides sensitivity settings so you can level match the input sensitivity of the Savoy G3 with the output voltage of your theater processor. The back panel input sensitivity switch has three options: A, B, & C. The ...

    • Connecting a subwoofer to the Bijou x100

      Using the Sub Out RCA port on the Bijou 2100, 3100, and 5100D, the Bijou can send audio to a powered subwoofer or to a subwoofer amplifier. To connect a subwoofer to the Bijou5100D's bridged output, follow the instructions here: ...