How To: MXNet 1G Proper Network Connections

• Related Articles

• Dante Controller for the MXnet CBOX

  An Introduction Guide to the AC-MXNET-DANTE-CBOX This article goes over the majority of features that are currently available for the AC-MXNET-DANTE-CBOX, such as configuring and monitoring devices, performing route subscriptions, and more. Note: the ...

• MXnet 1G API ~ V1.26.1

  Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.26.1 Control Box Version: 2.71 && V4.21 and above Instructions and API attached

• How to: Setup and Configure an MXnet Network Switch for AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 Devices.

  Overview This will be a configuration guide for configuring an MXnet network switch to work in tandem with the AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 devices. The new AC-MXNET-1G-DANTE-EV2/DV2 products use tagged traffic to allow for MXnet ...

• How To: Change MXNet endpoints and Cbox to DHCP

  Overview To meet the commercial market requirements, DHCP support was added to the MXNET 1G system. This means all MXNET 1G ecosystem components support DHCP including encoders, decoders, control box (CBOX), and MXNET switches. This process applies ...

• How To: Convert an AC-MXNET-CBOX-HA to a Different Software Platform

  How To: Convert an AC-MXNET-CBOX-HA to a Different Software Platform This article walks through the necessary procedures and requirements to convert a CBOX-HA to a different software platform, either for MXnet 1G, MXnet 10G, and others. Requirements: ...