How To: MXNet Point to Point Setup
This presentation demonstrates how to setup point to point extension with an MXNet Encoder and Decoder.
MXNet AVoIP are a great solution in installations where the Category Cabling cannot meet the demand of HDBaseT.
Brought to you by Kevin Wang, Director of Product Management.
Related Articles
How To: Change MXNet endpoints and Cbox to DHCP
Overview To meet the commercial market requirements, DHCP support was added to the MXNET 1G system. This means all MXNET 1G ecosystem components support DHCP including encoders, decoders, control box (CBOX), and MXNET switches. This process applies ...
MXnet 1G API ~ V1.26.1
Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.26.1 Control Box Version: 2.71 && V4.21 and above Instructions and API attached
The MXNet Quick Connect Guide
THE MXNET 1G ECOSYSTEM QUICK CONNECT GUIDE The MXNet Ecosystem is an AV-over-IP platform of products that use a traditional networking infrastructure to route video and audio signals throughout large scale systems with unlimited numbers of sources ...
MXNet Ecosystem Training
Dolby Vision Support, Dolby Atmos Downmixing Support, Quick Switching, endless sources routed to endless displays; Welcome to MXNet. Join Tom and John from AVPro as they give integrators an introduction to the AV over IP/Networked AV system called ...
How To: Using the MXNet USB Control Tool
Powerpoint and software for the USB Control Tool used when configuring Point To Point, Multicast Settings, and Control Routing.