The iPad app does not work with my Concert AVR 7/9

• Related Articles

• What is the difference between the Concert AVR-7 and the Concert AVR-9?

  The main difference between the receivers is power. The Concert AVR-7 outputs 100 watts per channel into 8 ohms. While it will play into 4 ohms, it is a Class AB regulated power supply so the power output will not increase when it sees a lower ...

• Concert AVR-7 / AVR-9 and Maestro M5 / M9 Firmware, Manual, and Control System driver downloads

  Here you will find all the important downloads for the AudioControl AVR-7 and AVR-9 receivers, and the M5 and M9 processors. In of the folders linked below, you'll find the latest firmware, user manuals, automation tables, and control system drivers ...

• Can the Zone 2 pre-outs on the Concert AVR 7/9 be sourced from both analog and digital signals?

  Yes! Unlike previous generations of our AVR’s the Concert AVR-7 and 9 CAN send signal out the RCA Zone 2 pre amp outputs from a digital source, not just analog. It is good to note since the Zone 2 output is analog, the AVR WILL downmix the digital ...

• Can I use Channel 6+7 to Bi-Amp the front channels, while still using pre-outs for Dolby Atmos height speakers on my Concert AVR or Maestro M9?

  Yes. Within the setup menu of the AVR 7/9 or M9 – you can select what channel 6 and 7 will be used for. Within the speaker type menu, scroll down to “use channel 6 & 7 for” You can select “Biamp L+R” and still be able to use the pre-out’s for the ...

• Are Sub 1 and Sub 2 out on the Concert AVR 7/9 and M9/5 independent?

  Sub 1 and Sub 2 output on our AVR’s and pre processors are not independent. They are fed by the same sub channel. You can designate which pre output the AVR/pre processor outputs the sub channel via the Speaker Types tab on the On Screen Display: The ...