Architect amplifiers have both local zone 12 volt trigger connections and Master 12 volt trigger connections. The Local zone connection is a 3.5mm TS input connector. The Master trigger connection is either the 3-pin block connector or the two 3.5mm ...
The Architect P250 EQ comes equipped with 2 EQ presets, configurable with the switch on the back of the amplifier. When the switch is set to OFF, the P250 doesn't change any of the frequencies on the incoming signal. With the switch set to preset 1, ...
The Architect P250 is a 2-channel amplifier that allows you to hook up 8 speakers (or more) to create a large, multi-speaker audio zone. Because there are only 2 channels, you will need to be mindful of how the speakers are wired to avoid putting the ...