CBOX
MXnet MV41V2 API V1.00 ~ 07-22-2025
Table of API Commands MV-41 Main Board API Commands Command Description H Help STA Show Global System Status SET RST Reset to Factory Default SET RBT System Reboot SET ADDR xx Set System Address to xx (xx=00-99 where 00=Single) SET LCD ON Tx Set how ...
How To ~ Upgrade the CBOX or V2 FPGA firmware on an MXnet System Configured for High Availability
How To: Upgrade the CBOX or V2 FPGA firmware on an MXnet System Configured for High Availability. This article provides guidance on performing system updates on both AC-MXNET-CBOX-HAs when configured for High Availability Mode on an MXnet platform ...
Dante Controller CBOX API ~ V1.00
AC-MXNET-DANTE-CBOX API Published Version: V1.00 Date Published: 6/27/2025 Download Link: https://avproglobal.egnyte.com/dl/wgfnjhLP7P Requirements Dante CBOX RJ-45 cabling Personal Computer Terminal Client capable of establishing telnet/TCP sockets ...
Dante Controller for the MXnet CBOX
An Introduction Guide to the AC-MXNET-DANTE-CBOX This article goes over the majority of features that are currently available for the AC-MXNET-DANTE-CBOX, such as configuring and monitoring devices, performing route subscriptions, and more. Note: the ...
How To: Convert an AC-MXNET-CBOX-HA to a 4-In-1 Software Package.
How To: Convert an AC-MXNET-CBOX-HA to a 4-In-1 Software Package This article walks through the necessary procedures and requirements to convert a CBOX-HA to utilize a 4-in-1 Software package, which contains firmware for 1G, 10G, USP, and Dante ...
How To: Configure Two AC-MXNET-CBOX-HAs for High Availability Mode
What is High Availability? High Availability is a new feature introduced in AC-MXNET-CBOX-HA firmware V4.25 (download link here), or V5.02 for AC-MXNET-10G-CBOX-HA products, That provides the ability to link two AC-MXNET-CBOX-HAs together in a ...
How To Obtain and Utilize the Video Sub-Stream && Image Snapshots of MXnet 1G Endpoints on an AC-MXNET-CBOX-B/HA
How To: Obtain a MXnet 1G Endpoint's video sub-stream URL && Image Snapshots to be utilized by Third Party Devices This document describes how to obtain a URL that allows access to the Motion JPEG video sub-stream generated by a V2 encoder or ...
MXNet 10G - API ~ V1.05
The PDF file attached to this article contains available API commands for the MXNet 10G ecosystem. You can connect to the AC-MXNET-10G-CBOX using PuTTY (Connection Method: Telnet, use TCP Port 24) to execute the commands listed in the API ...
How To: Build Video Walls and Video Wall Layouts Presets
Learn to construct Video Walls and configure preset layouts using the MXNet API and Mentor GUI. This Presentation is brought to you by Kevin Wang, Director of Product Management.
MXnet 1G API ~ V1.26.1
Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.26.1 Control Box Version: 2.71 && V4.21 and above Instructions and API attached