Network Switches
Fiber Optic Module Diagnostic & Troubleshooting Cheat-Sheet
Fiber Optic Module Diagnostic & Troubleshooting Cheat-Sheet Purpose Quick reference for interpreting Digital Optical Monitoring (DOM) values on fiber optic modules (SFP, SFP+, QSFP, etc), identifying acceptable, caution, and unacceptable levels, and ...
How To Configure the AC-MXNET-SW12 For Stacking to One or Multiple switches
How To: Configure the SFP+ ports of an AC-MXNET-SW12 for Stacking to One or More Network Switches This article goes over how to configure the 10G SFP+ ports on an AC-MXNET-SW12 (Called “SW12” from here on) for stacking to one or more network ...
How To: Configure QSFP+ ports of an MXnet 10G Network Switch to operate as 4 10G SFP+ ports (4x10G Breakout Mode)
This article provides step-by-step instructions on how to configure one or multiple QSFP+ ports to operate as 4 10G SFP+ ports (to be utilized with a 4x10G breakout cable (The breakout cable SKUs are the following: AC-40G-BOC-01, AC-40G-BOC-02, ...
How to: Setup and Configure an MXnet Network Switch for AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 Devices.
Overview This will be a configuration guide for configuring an MXnet network switch to work in tandem with the AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 devices. The new AC-MXNET-1G-DANTE-EV2/DV2 products use tagged traffic to allow for MXnet ...
How to: Import/Export Files to/from a Switch Using a TFTP Server
Overview This document describes how to export the current configuration file of a switch to a Trivial File Transfer Protocol (TFTP) server. This process is essential for network administrators to back up switch configurations and to ensure smooth ...
How to: Enable Port Mirroring on an AVPro MXNet Switch
What is Port Mirroring? Port mirroring, also known as port monitoring or network tapping, is a feature in network switches that allows the network administrator to copy and send network traffic from one port (or group of ports) to another port for ...
MXNet Network Switches - Configuration and Command Guides
This article includes two documents (located at the bottom of this page as attachments) for general and specific requirements when configuring AVPro's MXNet network switches. For a basic overview of connecting to the switch, accessing the CLI, and ...
How to: Uplink Two AC-MXNET-10G-SW12C Switches
Introduction This article guides you through the various methods of uplinking (stacking) the AC-MXNET-10G-SW12C network switch, providing connection diagrams, configuration files, and other relevant information. NOTE: Due to bandwidth constraints, it ...
How-to: Configuring MXNet Network Switches to Enable Dante™ and MXNet AVoIP Traffic on the Same VLAN
This article is a comprehensive set of instructions for configuring the following MXNet network switches in order to run Dante audio traffic on the same VLAN as the MXNet encoders and decoders: AC-MXNET-SW10 AC-MXNET-SW12 AC-MXNET-SW24 AC-MXNET-SW48 ...
MXNet Network Switches - Basic Operation Configuration Guide
Covering basic switch connections, GUI operation, and VLAN configuration. This presentation is brought to you by Kevin Wang, Director of Product Management. A note from Kevin: Hybrid VLAN solves multiple inter-VLAN routing issues. The Dante VLAN ...