AC-MXNET-1G-DV2 Firmware - V1.XX & V2.XX

AC-MXNET-1G-DV2 ~ V1.07 ~ 03/13/2025

NOTICE: Please update the CBOX first before attempting an update on any endpoints.

If you cannot select your device on the CBOX using the downloaded firmware, you may have a device that is a different hardware iteration. Please see this article to determine what firmware to load onto your devices: https://support.avproedge.com/portal/en/kb/articles/how-to-determine-the-appropriate-firmware-on-an-mxnet-1g-ecosystem

Download Link for Latest Firmware Here: AC-MXNET-1G-DV2 Firmware + Changelogs

Release Notes:
V1.07
  1. The device's front panel text will flip positions every 10S after a period of time from when the device is powered on. This is done to mitigate screen burn-in on the LCD display after an extended period of time. 
Changelogs for past firmware iterations are attached to this article for review, if desired.

    • Related Articles

    • MXnet 1G API ~ V1.26.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.26.1 Control Box Version: 2.71 && V4.21 and above Instructions and API attached

    • AC-MXNET-CBOX ~ V2.73 ~ 03/14/2025

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...

    • How To: Using the MXNet USB Control Tool

      Powerpoint and software for the USB Control Tool used when configuring Point To Point, Multicast Settings, and Control Routing.

    • The MXNet Quick Connect Guide

      THE MXNET 1G ECOSYSTEM QUICK CONNECT GUIDE The MXNet Ecosystem is an AV-over-IP platform of products that use a traditional networking infrastructure to route video and audio signals throughout large scale systems with unlimited numbers of sources ...

    • MXNet 10G - API ~ V1.05

      The PDF file attached to this article contains available API commands for the MXNet 10G ecosystem. You can connect to the AC-MXNET-10G-CBOX using PuTTY (Connection Method: Telnet, use TCP Port 24) to execute the commands listed in the API ...