How To: Using the MXNet USB Control Tool

• Related Articles

• The MXNet Quick Connect Guide

  THE MXNET 1G ECOSYSTEM QUICK CONNECT GUIDE The MXNet Ecosystem is an AV-over-IP platform of products that use a traditional networking infrastructure to route video and audio signals throughout large scale systems with unlimited numbers of sources ...

• How To: Change MXNet endpoints and Cbox to DHCP

  Overview To meet the commercial market requirements, DHCP support was added to the MXNET 1G system. This means all MXNET 1G ecosystem components support DHCP including encoders, decoders, control box (CBOX), and MXNET switches. This process applies ...

• How To: USB bridge FW update for AC-MXNET-1G-E/AC-MXNET-1G-AVDM-E Versions V3.33 through V3.37.

  If a firmware update was already attempted via the CBOX, and the Encoder OLED is not turning on, or if you're experiencing issues during the update process, please call Technical Support for further assistance. What you'll need: A Windows Based PC A ...

• MXnet 1G API ~ V1.26.1

  Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.26.1 Control Box Version: 2.71 && V4.21 and above Instructions and API attached

• 10G MXNet SUI Diagrams

  AC-MXNET-10G-TCVR-PRO SUI USB The AC-MXNET-10G-TCVR-PRO features the built-in Icron™ USB module implemented with the latest Icron™ USB firmware (1.9.4) and supports SUI USB pairing mode, meaning that one USB Tx can simultaneously connect to up to ...