AC-MXNET-1G-EV2 - V1.XX / V2.XX Firmware Updates

AC-MXNET-1G-EV2 ~ V1.16 ~ 03/13/2025

NOTICE: Please update the CBOX first before attempting an update on any endpoints. AC-MXNET-1G-EV2 firmware V1.10 Requires CBOX V2.55 or CBOX-B V4.09, or higher in order for RS-232 communication to function properly. 

If you cannot select your device on the CBOX using the downloaded firmware, you may have a device that is a different hardware iteration. Please see this article to determine what firmware to load onto your devices: https://support.avproedge.com/portal/en/kb/articles/how-to-determine-the-appropriate-firmware-on-an-mxnet-1g-ecosystem

Download Link for Latest Firmware Here: AC-MXNET-1G-EV2 Firmware + Changelogs

Release Notes:
V1.16
  1. The device's front panel text will flip positions every 10S after a period of time from when the device is powered on. This is done to mitigate screen burn-in on the LCD display after an extended period of time.  
  2. Optimizations to HDR processing, in particular in regards to dynamic HDR metadata.
  3. Added API commands to change how MCU HDR/TMUT messages are processed, via the CBOX.


    • Related Articles

    • AC-MXNET-CBOX ~ V2.73 ~ 03/14/2025

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...

    • How To: USB bridge FW update for AC-MXNET-1G-E/AC-MXNET-1G-AVDM-E Versions V3.33 through V3.37.

      If a firmware update was already attempted via the CBOX, and the Encoder OLED is not turning on, or if you're experiencing issues during the update process, please call Technical Support for further assistance. What you'll need: A Windows Based PC A ...

    • AC-MXNET-DANTE-CBOX Firmware ~ V1.07 ~ 03-10-2026

      AC-MXNET-DANTE-CBOX Firmware Release Latest Firmware Download Link: https://avproglobal.egnyte.com/dl/yxDRrW3wFvwx Conversion Firmware Download Link: https://avproglobal.egnyte.com/dl/mQTdpBcPXm4c Please visit this KB article for instructions on ...

    • AC-MXNET-10G-TCVR Firmware ~ MCU V1.49 ~ FPGA V2.3.0.1 ~ 04-17-2026

      NOTE: If your AC-MXNET-10G-TCVR is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...

    • MXnet 1G API ~ V1.26.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.26.1 Control Box Version: 2.71 && V4.21 and above Instructions and API attached