XP 8v is a high-end control processor designed for automating electronic systems in various environments.

Product Overview

• XP 8v features a 1GHz processor, 1GB RAM, and 512MB flash memory.
• It includes eight I/O ports, relay outputs, RS-232 ports, and sense inputs.
• Supports IR emitters and RTI power sensing modules.
• Non-volatile memory retains configurations without power.

Installation & Operation

• Programming is done via RTI’s Integration Designer software using USB or Ethernet.
• Firmware updates are recommended and can be installed through the USB port.

Infrared Emitters

• Each I/O port can drive up to four IR emitters directly.
• Requires an amplified connecting block for more than four emitters.
• IR output gain is adjustable for each port.

RS-232 Communication

• Supports two-way control via eight RJ-45 output ports.
• Ships with RJ-45 to DB-9 adapters for RS-232 connections.
• Communication cabling should be limited to 50 feet depending on baud rate.

Sense Inputs / Relay-Trigger Outputs

• Sense inputs can trigger events based on contact closure or voltage.
• Relays can be configured for dry contact closure or voltage trigger output.

Power Supply

• Powered by a 12VDC/1A power supply.

Safety and Warranty

• Follow safety instructions and retain them for future reference.
• Warranty covers three years for products, excluding consumables.