RP-4 Firmware

RP-4 Firmware

VERIFYING THAT YOU NEED THE UPGRADE
If you already have version 1.03 or newer you should not upgrade your
firmware to this version. Use the "Get Firmware Version" command from
the Communications menu in Integration Designer to determine the
current firmware version. If the reported version number is 1.02.19
or higher, you do not need this update.

INTEGRATION DESIGNER SUPPORT
You must use Integration Designer 9.0 or higher to perform this update.

FIRMWARE UPGRADE PROCEDURE
1. Choose the "Update Firmware" command on the Communications menu in
   Integration Designer.
2. Select the RP4FW_103.RFW file included with this README file.
3. Make sure you have your program saved (see the WARNING above), then
   click OK.
4. Plug the USB cable into the RP-4 and wait for the firmware transfer
   to complete.
5. Unplug the USB cable when prompted, wait for the RP-4 to reset (this
   should take ten to twenty seconds).
6. Re-connect the USB cable and use the "Get Firmware Version" command
   on the Communications menu to verify that the update completed.  If
   the update was successful, it should report version 1.03.21 as the
   version number.

LIST OF CHANGES IN THIS RELEASE (RELEASE 1.03)
1. Fixed a problem with extended IR sustain over RF.


ARCHIVE LIST

LIST OF CHANGES IN THIS RELEASE (RELEASE 1.02)
1. Improved RF (Changes to accept a wider variance of RF pulse widths)
2. Better handling of successive but differing trigger codes

LIST OF CHANGES IN RELEASE 1.01 (Beta Release Only)
1. Fix for non-sustain IR codes running together

LIST OF CHANGES IN RELEASE 1.0
1. Initial production release

    • Related Articles

    • RP-4 Operation Guide

      Key Features of RP-4 Control Processor: Stores all system commands and macros for reliable control. Integrated 433MHz RF receiver. Four infrared ports with routing and output adjustment. Supports RTiPanel App for one-way control via Apple iOS ...

    • RP-4 Specification

      The RP-4 is a cost-effective control solution for single-room installations like home theaters, media centers, and bedrooms. It features an integrated 433-MHz RF receiver, IR control, voltage sense inputs, and relays in a compact design. Supports ...

    • CX7 Firmware

      VERIFYING THAT YOU NEED THE UPGRADE If you already have version 22.3.31 or newer you should not upgrade your firmware to this version. Use the "Get Firmware Version" command from the Communications menu in TheaterTouch Designer or Integration ...

    • U3 Firmware

      NOTE: Please follow the FIRMWARE UPGRADE PROCEDURE carefully. There are two parts to the update process and you must complete both to successfully update the firmware. VERIFYING THAT YOU REQUIRE UPGRADE If you already have version 21.11.010 or newer ...

    • KX4 Firmware

      VERIFYING THAT YOU NEED THE UPGRADE If you already have version 25.1.27 or newer you should not upgrade your firmware to this version. Use the "Get Firmware Version" command from the Communications menu in TheaterTouch Designer or Integration ...