Stuck in a Pickle
Updating Firmware on ProControl
This document provides step-by-step instructions for updating firmware on Pro Control remote devices, processors, and accessories using Pro Control Studio software. Firmware Update Process Ensure the latest version of Pro Control Studio (PCS) is ...
Implementing Toggle IR Codes
The document explains the use of Toggle IR codes in programming macros for devices that rely on toggle bits for IR control. Toggle IR codes consist of two components: the main IR code and its toggle bit. The toggle bit ensures the receiver recognizes ...
How to Use Sense Ports
This document explains the purpose, wiring, and programming of the Sense Input ports on ProLink.r and ProLink.z processors for monitoring device states and triggering macros. Sense Ports Overview Both models have two sense ports near network and ...
RF Troubleshooting Tips and Tricks
This document provides troubleshooting guidance and best practices to minimize RF interference and ensure reliable communication between Pro Control remote systems and processors. RF Interference and Placement The system uses 433 MHz and 2.4 GHz ...
How to Implement Wait Screens
This document provides step-by-step instructions for adding a "Please Wait" screen to a Pro24.r remote system using a ProLink.r processor, primarily to inform users during system startup or processes. Adding a Please Wait Screen on R Series Systems ...
Learning IR - Wizard Based
This guide outlines the step-by-step process for learning IR codes into the library manager of PCS (Pro Control Studio) to enable auto programming of pages and preprogrammed buttons for remote control devices. IR Library Setup and Device Addition ...
Importing Existing R-232 Code DB into PCS
Open Pro Control Studio (PCS). Navigate to Libraries under Controlled Devices. Open the RS-232 Library Manager. Select Device -> Import. Locate your RS-232 library file (.rs232lib) and click Open. Choose specific devices or select all, then click OK. ...
Importing Existing IR Databases into PCS
Purpose: Guide for importing existing IR databases into Pro Control Studio (PCS) for future use. PCS IR Library: PCS uses a separate, static library for user-created IR codes. Commands in the master IR database cannot be edited, but additional IR ...
Using Flags with Power Toggle
Purpose: Explains using flags to simulate discrete Power On/Off commands when only a Toggle Power IR command is available. Naming Flags: Flags are named under the Macro Tab (e.g., "Cable Power" and "TV Power"). Flag Operations: Flags turn memory bits ...